• Tue-Sat | 10:00am - 08:00pm
  • Sun | 12:00pm - 08:00pm

The Cordial | Electrical Requirements

Solution #1

  • 50 AMP 4-Prong (Straight Blade)
  • Single Circuit

This tends to be the most optimal electrical power source. A 50amp 4-Prong provides a single centralized source without the need for adapters or backup cables. 

The only drawback to a 50amp receptacle will be the need for The Cordial Mobile Bar to be located closer to said power source as opposed to other solutions mentioned below. 

This is due to the extension chord needed for the receptacle is drastically limited in it’s length without reducing amperage needs or investing in high cost heavy extension cables.

Solution #2

  • 2x 20amp Receptacle
  • Two Separate Circuits

The 3 Prong 20amp outlet is a lesser known version of the standard 15amp wall receptacle used in most homes. 

The plug used in these outlets, will have one of the straight blades turned 90* parallel from it’s sister blade. Because of this, it’s important that when using 20amp cables that the receptacle has a little line in-between one of the straight blades.

We then combine two separate 20amp circuits. This means that instead of plugging two cables within one outlet area, you would need two separate outlet areas, each of them with their own breaker switch in the electrical breaker box.

We then merge the two 20amp outlets into a single 40amp 120v power source. 

Solution #3

  • 2x 15 AMP 3-Prong (Standard)
  • Two Separate Circuits

The 3 Prong 15amp outlet is the most common outlet or receptacle used. 

We can operate with two separate 15amp circuits. This means that instead of plugging two cables within one outlet area, you would need two separate outlet areas, each of them with their own breaker switch in the electrical breaker box.

We then merge the two 15amp outlets into a single 30amp 120v source.